Fittings in Plumbing Works - Essay Sample

Fittings are used in plumbing works to connect pipes or tubes, which enable the regulation of fluid, flow to take place. Fittings allow the pipes and tubes to adopt various shapes and sizes. Fittings come in different shapes and adjust so that the can fit the various uses a plumber intends to use the tubes and pipes. For instance, the elbow shaped fittings enable the fluid to take a different direction and comes in different angles of 90, 45, or 22.50. The elbows are put between pipes. Depending on the degrees and length of an elbow joint, the can be used in both low and high-pressure points where the fluid flows with more speed or less. The 450 elbow is mostly used in the transportation of fluids like water, chemicals, food, amongst others. Some of the materials used in making the elbow joints include plastic and copper.

Coupling fittings are used to connect two pipes. In most cases, the size of pipes different and an adapter has to be used to complete the coupling process. Coupling fittings can either be a slip or regular. The former is made without an insertion pipe while the latter has the pipe enabling easy connection between the two pipes. The Coupling by Hub is easy to install as long as the plumber has an estimate of the size of pipes they will connect in the short-end. On the other hand, the male adaptor MPT (male pipe thread) by hub is one of the most preferred intertwining connections that can stand high underground temperatures. It allows connection to threaded points of intersection making it possible to initiate a free flow of the drainage system of the DWV. The male hubs have a high resistance to corrosion in case there is the transportation of chemicals taking place through the fittings.

The double wye fittings came in a variety of sizes and angles and used in drainage systems though it should not be used in areas where the temperatures can go beyond 1500. Their durability allows them to become a preference for most residential and commercial fittings since they do not need any form of cutting. Hence, their installation is fast and easy, and a plumber can thread, cement, or roll-groove when connecting the wye. The main purpose of the wye is draining more than two pipes at an angle of 450 with ease. The 45 angle wye by Hub allows the free flow of fluids in different directions without any form of interruption.

The Female Adaptor FPT by Spigot is one of the strongest and most durable brands in the industry due to the material used to manufacture the fitting. Each end of the fitting is made with a different opening to allow the fitting of more pipes from the rear end. The Male Adaptor Spigot by MPT is similar to the Female Adaptor FPT by Spigot as it allows high-pressure liquids to pass through due to the durable materials used in the manufacture of the fittings. The fittings are also scheduled to accommodate corrosive materials that may cause wear and tear. Both commercial and residential units can make use of the male and female adaptors depending on the immediate needs. The adaptors have a competitive advantage since they come in different sizes allowing the plumbers to use them in different settings.